Z-Endstop for Klipper Auto Z Calibrate (Mercury One with Stock Ender 5/Plus Bed)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This upgrade easily allows you to use the auto z-calibration with Klicky probe. Klipper config still needs updating.
- Ocena
- 5 / 5
- Polubienia
- 92
- Pobrania
- 336
- Wydruki
- 1
- Wyświetlenia
- 5058
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Edit 30 Jun 22 - Tightened tolerances for heatset insert holes for both E5/Pro and E5 Plus models. Reduced diameter from 5mm to 4.7mm.
Edit 17 Oct 22 - Added mirrored versions for the Ender 5/Pro version for users who have done a dual Z mod (thanks for the request Roadrunnr!)
Items needed:
- 1x HartK Voron Sexbolt Mod kit (https://www.aliexpress.com/item/3256804029717900.html)
Optional:
- M3 screws and D5xL4 heat-set inserts (4x/3x for Ender 5/Pro, 5x/4x for Ender 5 Plus)
- 1x M3 nut for brush lock
- Brass Masonry Brush (https://www.amazon.com/Curved-Masonry-Bristle-Cleaning-Welding/dp/B08726BW77 or similar)
Print Orientation:
- Ender 5/Pro - Print on its side, so angles are 45 degrees. Minimal support is needed.
- Ender 5 Plus - Print on the side opposite the PCBA connector opening.
These models are tailored to Ender 5/Pro/Plus which have been converted to the ZeroG Mercury One CoreXY system.
Ender 5/Pro version mounts to the rear of the bed using existing M4 screws/holes
Ender 5 Plus version replaces the left-rear Mercury One riser for the bed using existing M4 screws.
M3 screw-cap is to ensure the switch is actuated without slipping off the edge of the screw head.
Optionally, you can add a brush holder. STEP files are included so you can modify the brush holder to accommodate other brush sizes you may have on hand. For the