PipClip: print-in-place knife/holster belt attachment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A print in place Tek-Lok-compatible belt clip. No hardware required for assembly! If you need Chicago screws,…
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 167
- Wydruki
- 0
- Wyświetlenia
- 993
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
A print in place Tek-Lok-compatible belt clip. No hardware required for assembly!
If you need Chicago screws, McMaster-Carr 94887A129 works, and there are plenty on eBay too.
Includes a spacer for use with narrower belts, if needed.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.2mm layers, 0.4mm nozzle
Infill:
60% cubic
Filament:
eSun PLA+
Notes:
Check your slicer's preview to ensure that there are no supports in the hinge channel. Cura's 'Touching Build Plate' support option works too.
Changelog
2021/6/29
* Increased clearance for spacer boss in belt clip (after having to pry one out with a putty knife)2021/6/30
- Same as yesterday, but a little more
- Improved spacer placement
Category: Sport & Outdoors
