Dice Tower for Sliced Octagonal Dice Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small dice tower to be used with my Sliced Octagonal Dice Tray
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 401
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A dice tower to be used with my octagonal dice trays.
You need to print an additional dice tray slice and replace one of the slices in the original dice tray with this. The tower goes fits on this new slice.
There are two versions of the new slice. One for the dice tray with a center bulb and one for the plain dice tray. Only print the one you actually need.
If you print the tower with the top towards the printing bed you won't need any support.
Use with one of these dice trays:
Support My Work
Should you want to, you can support me on Patreon. If you are unable to become a patron, remember that likes are free and make designers happy! :-)
On Patreon, it is also possible to get a commercial license for my designs.