RetroNAS enclosure for Raspberry Pi 4 + Western Digital Elements hard drive
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple enclosure for a RetroNAS setup.
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 214
- Wydruki
- 0
- Wyświetlenia
- 1680
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Looking for a enclosure for your RetroNAS project? This one uses a common Western Digital Elements hard drive for storage. The WD drive sits down inside a custom stand and a Raspberry Pi 4 enclosure bolts onto the side making for a tidy little package. All of the ports are still accessible in case you need to plug in a HDMI cable or anything else.
There are 3 pieces. The stand, and both front and back case pieces for the Pi4. I have also included the master STEP file for the design in case you need to remix the hard drive stand to work with other drives.
Assembly is easy. The Raspberry Pi 4 case assembles with 4 m2.5 x 12mm screws. Then the PI attaches to the hard drive stand with 2 M3 x 6mm screws through the bottom.
I have included STL files for all the pieces and the STEP file for the project in case you want to remix the hard drive stand for a different drive.
More info on the RetroNAS project: https://github.com/danmons/retronas