Housing for UV-C Bulb for TLC
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Casing and Holder for a UV-C Bulb. Printed in PLA. Bulb and base used listed below. The base was disassembled and only…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 242
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution
If you like this model, feel free to tip me at https://ko-fi.com/kcthechemist. If not no worries and enjoy!
Casing and Holder for a UV-C Bulb. Printed in PLA. Bulb and base used listed below. The base was disassembled and only the black housing and E26 socket was used. This design should work with any E26 sockets with plugs on amazon. The two pieces were glued together with using DCM to solvent weld the pieces.
Fusion 360 doesn't allow hobby accounts to export objects as editable STEP files anymore so if major adjustments are needed reach out to me! :D
Bulb: https://www.amazon.com/dp/B08HFGSC3R?psc=1&ref=ppx_yo2_dt_b_product_details
Base: https://www.amazon.com/dp/B08H836RQF?psc=1&ref=ppx_yo2_dt_b_product_details
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
200
Infill:
15
Filament: Printed Solid Jessie's PLA PLA Blue
Category: Engineering