Rotary Tool Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a wall mountable rack for the 160W HobbyKing Rotary Tool and the tool set, but may fit other rotary tools also…
- Ocena
- 5 / 5
- Polubienia
- 127
- Pobrania
- 540
- Wydruki
- 1
- Wyświetlenia
- 2733
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
This is a wall mountable rack for the 160W HobbyKing Rotary Tool and the tool set, but may fit other rotary tools also like a classic Dremel. The lower shelf is for the cutting disks and the polishing paste. On the left side there is a cable manager and on the right side a holder for the removable micro light what comes with the tool.
The cable manager on the left side needs support on the build plate only.
To save material the backside has big recessed holes. Those need to be bridged about 15mm. The bridged and the supported faces are not visible when mounted on the wall.
I have used PLA, it's good enough.
This thing is big, almost 20x20x25 cm so the whole print surface of the MK3 is needed.
Feel free to remix according to your needs.
Print instructions
Category: Tool Holders & Boxes Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: Yes
Resolution: 0.2
Infill: 20%
Filament: Any Any Any