Castle Mamba Monster 2 ESC adapter mount for Arrma 6s
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
WIP-more Improvements to come may add positive mounting design if current design doesn't keep the esc seated properly.…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 463
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
WIP-more Improvements to come
may add positive mounting design if current design doesn't keep the esc seated properly.
Utilizes 2 long M3 screws underneath the mount plate and 1 short M3 screw on top next to the motor wire management clip.
Verified Fitment on Arrma Typhon TLR, may fit others.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
35
Filament: Hatchbox PPLA Orange
Notes:
recommended settings:
Walls/perimeters: 3
Z Seam Alignment: corner
may want to print in abs or better however PLA has held up during testing so far
Category: R/C Vehicles