Kia compatible Replacement Emblem
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A few variations of emblems compatible with many Kias from 1986 - 2021
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 277
- Wydruki
- 1
- Wyświetlenia
- 1075
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I decided to share a replacement I made for the front emblem for my 2000s Kia after mine went missing on a particularly rough trip to the mountains.
I've included the 1986 to 1994 design and the 1994 to 2021 but I didn't include the new redesign. If you'd like a different Kia logo or if you want a variation to the models feel free to ask.
The emblems are 132mm wide x 65mm tall x 3mm thick.
Print the “Test Fit” first to figure out if you need to scale it to make a tighter fit. It's only about 1mm thick so material usage should be minimal.
The models are design so that a simple filament swap gets you different colors, this can be achieved with either a “pause at layer height” or “color change” depending on your slicer and firmware.
I attached mine via double sided tape.
The source images were grabbed from Logopedia but the models are purely my own.