Hygrometer stand and Bracket for Rubbermaid 21 Cup Dry Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A hygrometer clip or bracket for a EEEKit Hygrometer (Source:…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 332
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
A hygrometer clip or bracket for a EEEKit Hygrometer (Source: https://smile.amazon.com/gp/product/B07BLY177S/?tag=thingiverse09-20)
There are two versions:
One just adds a notch in the ring which allows you to change the battery in the hygrometer without removing it from the stand. I found that the press-fit was quite tight getting the hygrometer into the stand, and this will prevent stress on the hygrometer(s) from repeated insertion and removal.
The other version also includes the battery-change notch, and adds a slide on clip which works with the "Rubbermaid 21 Cup Dry Box" by OneEyeDesign https://www.thingiverse.com/thing:3988583. You don't have to cut any holes in the drybox, or use any hardware to mount this, It just slides onto the base of the rollers as shown in the pics. The inner wall of the Rubbermaid container keeps the bracket in place even if the slide on clip doesn't have enough friction.
Print Settings
Rafts:
No
Supports:
Yes
Category: 3D Printer Accessories