Octopus post cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A normal post cap does not look good enough? I have something cute for you.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 85
- Wydruki
- 2
- Wyświetlenia
- 740
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Check out my other postcap designs: https://www.printables.com/de/social/256636-seemomster/collections/185470
At the moment the octopus post cap is availabel for posts with a diameter of 16.5, 18.5, 22, 34.5, 38.5, 40.5, 42.5, 48.5, 60.5 and 76.5 mm.
Every size is alvailable in 4 different models. the doublefaced variant is intended so that each side of the fence has its own face and the octopus does not have to be constantly turned back and forth.
But if none of them fits your post it is very simple to scale it. You import the octopus_100_postcap_for-scaling.stl (or the version you want). It will look something like this:
Make sure that the lock for scaling is closed, as shown in the red circle above. Now you can input your post diameter in mm as the Scale factor. I recommend to add a bit tolerance. Measured: 44.2 mm → Scale factor 44.7 mm. For example for a diameter of 34.5 mm it should look like this:
Print Settings
Resolution: 0.2 mm
Notes: It looks with a colour change.