Sanding Tool for jewellery
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
i love making pendants, rings and similar stuff out of silver or nickel silver, (or alpaca as we call it in…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 411
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
i love making pendants, rings and similar stuff out of silver or nickel silver, (or alpaca as we call it in Argentina).
one of the more tedious tasks is the sanding.. and some times there are small parts where only sand paper could be used but handing it with the hand or the common sticks was not good enough or confortable, so i made this lil tool based on the typical jewellers' saw, which made the sanding way faster and easier.
Items used:
-2x M5 nut and bolt (or a smaller M4 if you have) (or butterfly screw/nut which are way more confortable to work with.)
-2x washers to grab the sanding paper
- sanding paper.
Post-Printing
How to assemble it:
On all honesty, its pretty straight foward.
grab the nut, put it in the hole. grab the screw, and screw it.I'd recommend cutting the sanding paper in strips, no more than 5mm width, and/or 10mm if you plan on folding it in the middle to have a double sided strip (i used it this way most of the time)
Category: Art Tools