Hexagonal self propelled Siphon
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The origianl one is awesome, but i wanted a smaller one for "not so high" glasses. when i made it smalled i'd give me…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 94
- Wydruki
- 1
- Wyświetlenia
- 443
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution
The origianl one is awesome, but i wanted a smaller one for "not so high" glasses.
when i made it smalled i'd give me problems in the walls...
so i decided to make this one which is easier to print due to the flat walls.
it's a nice print to amaze kids and troll your friends too =D
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Clone
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
25%
Filament: grilon3 PLA green
Notes:
I recommend a high % of infill or as much walls tops and bot as necesary... just so you have a strong and water tight print. But it's all up to you.
Category: Engineering