1 / 1
Solaire of Astora Helmet — zdjęcie 1

Solaire of Astora Helmet

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I dont like the actual models of solaire's helmet, so i decided to make it again. I based my design on the 3d model of…

Ocena
5 / 5
Polubienia
67
Pobrania
354
Wydruki
1
Wyświetlenia
2124
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I dont like the actual models of solaire's helmet, so i decided to make it again.

I based my design on the 3d model of JKHub which seems to be pretty close (and in high detail) to the original one from Dark Souls 1. ( https://jkhub.org/files/file/2761-solaire-of-astora/ )

Still a work in progress. i did made the "rings" that go on the lower part of the helmet, but i feel that those would be better off with eva foam... later i might add them to the model but the are not printed in place, they will have to be glued.

this is V1. there's still some things missing (the back helmet details and the hole for the feather) but i believe its good to go already

Cuts to make it more 3d printable and so, will be made later.

Category: Costume

Tagi