gt2560 pin connector for Endstops
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Quick model i did for the 2 pin connectors the gt2560 needs for the endstops. (Recommend to print it 10%…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 119
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
This is a Quick model i did for the 2 pin connectors the gt2560 needs for the endstops.
(Recommend to print it 10% bigger)
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.1 - 0.05
Notes:
Print at 10mm/s
Doesnt matter the infill because is really small, but 100% wont harm.
print it with the lowest temp you can if you dont have a good cooling system.
Print it horizontally (rotate it 90 degrees on the X axis for better quality)
How I Designed This
Why dis?
I had a Arduino+RAMPS 1.4 board but it came burned.
Since i couldnt find quickly enough one, i bought the gt2560, but soon realized no radioshack or electronic house had the Pin connectors in needed.
So, the ATX and the 3pin fan connectors where here on thingiverse.. no luck with the hot ends... so, here it is!
Category: 3D Printer Accessories