Prusa I3 Power Supply "Geko Fan"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
...An old working power supply is a power supply that has been well cooled throughout its life... Hi !
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 1279
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
...An old working power supply is a power supply that has been well cooled throughout its life...
Hi !
A simple frame to hold a 24V fan onto the Prusa I3 MK3 power supply (see pictures)
(not tested on MK1, MK2,,but tell me if it's work on the psu frame..)
!!! The Original Prusa Power Supply is a 24V. To do this Fan Mod, you need a 24V Fan or a 12V fan and a DC/DC converter, see references here below...
Here is the fan i use and recommend
Very low noise and durability
Sunon is a fan brand you can count and that will hold the entire lifespan of the printer
60x60x6 24v
http://s.click.aliexpress.com/e/cmi5bMU
But you can use your 60x60 12v stock fan or another like this one
60x60x15 12V
http://s.click.aliexpress.com/e/vuOTDRS
Quieter yet if it's possible.
60x60x20 12V
http://s.click.aliexpress.com/e/bgouNMJI
But you MUST use a Dc/dc step down converter 24v->12v like this one (this model is adjustable)
https://s.click.aliexpress.com/e/_DnEOU13
and his case
https://www.printables.com/model/473896-lm2596-lm2577-xl4005-xl6009-dcdc-snap-on-buck-conv
Happy printing !
Renaud
(not tested on MK1, MK2,, because unfortunatly i don't own these printers but please report me if it's working on your psu frame..)