1 / 3
Lola Hayes Class Selector for Arkham Horror LCG
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A gadget to help remember the class selected for Lola Hayes.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 847
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (16)Powiązane
I wanted to have a stylish way to remember Lola Haye's current class and designed this small gadget. The indicator has small pegs on its back to snap into place. You can adjust the force needed for turning by sanding the pegs carefully with e.g. a nail file.
Bill of material:
- 6 cabochons with 16 mm diameter (got mine from Aliexpress)
- A laser-printed copy of the classes on glossy paper (I printed these https://boardgamegeek.com/filepage/190734/action-tokens-5-classes scaled to ~17 mm diameter which is about 64% on my printer)
- Glue (I can recommend Uhu Arts & Crafts Glue)
- Nail scissors
Build instructions
- Clean the cabochons with soap and warm water and let them dry.
- Put a drop of glue on the printout.
- Put the cabochon on top and press gently. Don't worry if the image looks foggy. It will clear again when the glue is dry.
- Wait for some hours.
- Cut the printout with the cabochons on it with the scissors. It is ok if the border is not perfect. The rounding of the cabochon will hide imperfections.
- Let the cabochon dry completely.
- Press the cabochon into the 3D printed base. Mine were so tight that I did not need glue actually.
Thanks to Spauliszyn (https://www.thingiverse.com/thing:4610666), whose snapping mechanism I have re-used in this model.