Circular Level for Bosch GSR12 Drill
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mount for a circular level for a Bosch GSR drill to help get vertical holes.
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 589
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a quick print (7min) for a little mount to attach a circular level to a Bosch GSR (EC/Brushless) drill.
On the backside of the drill is a M4 thread under a cover which can easily be removed.
The circular level has a diameter of 18mm and is pressfited into the mount. I added the step-file so remixing it for other diameter is easy. (They are bought from Pollin … 5 pieces for 2,50€ not sure if links are allowed)
I suggest turning ironing on so the contact surface of the mount and the level get the best alignment.
Printed in PETG.
Besides the circular level you need also a M4x8 countersunk screw.