Wood Thread Cutting Jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a jig to help cut wood threads in dowels. The initial version cuts threads in 1 1/4" dowels with 6 TPI. It…
- Ocena
- 5 / 5
- Polubienia
- 45
- Pobrania
- 157
- Wydruki
- 1
- Wyświetlenia
- 1699
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a jig to help cut wood threads in dowels. The initial version cuts threads in 1 1/4" dowels with 6 TPI.
It locks into the opening of a router table. You then insert a 60 degree v-bit in the router and raise it enough so that the tip matches the depth of the thread in the jig. You may have to adjust the height of the router bit. To cut the threads, you turn on the router and then feed the dowel into the guide end (the end without threads) while turning the dowel. It should catch after a few turns and the threads of the jig will continue to pull the dowel through at the correct rate.
I found the the YouTube channel “The Swedish Maker” used this design and made a variant of it.
Print Settings
Printer:
Railcore II 300ZL
Rafts:
No
Supports:
Yes
Resolution:
.2
Filament: matterhackers PETG blue
Category: Machine Tools