Electrolux or Gorenje fridge egg holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Electrolux or Gorenje egg holder to fit in fridge door
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 114
- Wydruki
- 2
- Wyświetlenia
- 659
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Thanks to Andy24CZ for their design on Thingiverse (https://www.thingiverse.com/thing:2837102), I can take no credit for the design, or my very minor updates.
This model was Eggs-cellent!!!
Andy Designed this for his Electrolux fridge, it fitted my Gorenje fridge quite well, but I realised I could squeeze in another 2 eggs into what would have been wasted space otherwise.
I also made a very minor tweak to just increase support on the very end, and thought it would make for easier printing than the smaller cylindrical support.
Size is approximately:
Width=90mm
Height = 22mm
Length = 370.5mm /or/ 416.2mm
370.5mm (longest edge) with smaller Left side 7 eggs (total 15 eggs)
or 417.2mm (longest edge) with larger Left side 9 eggs (total 17 eggs)
The biggest part is the "Eggs_Left_9(+2).stl" model, this just squeezed onto my 235mmx235mm bed if placed at 45 degree angle
Print Settings
Printer brand:
TEVO
Printer:
Tarantula
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
40%
Filament brand:
BasicFil PLA
Filament color:
BasicFil PLA Yellow
Filament material:
PLA