1 / 6
The Octo-Crumbler - 8-way Crumbl™ Cookie Cutter — zdjęcie 1
1 / 6

The Octo-Crumbler - 8-way Crumbl™ Cookie Cutter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Love Crumbl™ Cookies? Are they just too big and sweet to enjoy? or do you want to share them with (up to) 8 friends?!

Ocena
0 / 5
Polubienia
24
Pobrania
371
Wydruki
2
Wyświetlenia
2508
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Our family is into Crumbl™ Cookies.

But, if you have had them they are really rich and quite large.  As a family of 4 you'd think cutting into 4 pieces would be great. Nooo… they are too rich for ¼ of a cookie.  So, this is a family-requested, 8-way Crumbl™ Cookie Cutter… the Octo-Crumbler!

Please be aware that there are two models provide here.

The first is a 2 part/multi-color print.  This is kind of an advanced method, but it produces amazing results.  Here are the high level steps

  1. Print Octo-Crumbler-Text.stl first.  This is a 9 minute print, and is only .35mm high.  Use a bright color.  I used Red PETG.
  2. Do not remove the metal sheet.  Do not let the bed cool down.  As soon as the print is completed and the print head moves out of the way, re-preheat the bed to the same material temperature you used.
  3. Carefully remove the skirt line - without disturbing the lettering.
  4. Change the filament to a neutral color.  I used White/Clear PETG.  Purge the color until it runs perfectly clean.
  5. Print Octo-Crumbler-Body.stl on the same plate, same location, same orientation as #1. Since #1 is only .35mm in height, the nozzle will clear the text and embed the text into the surface of your Octo-Crumbler.
  6. Profit?

That's it.  You now have just learned a cool multi-color text embedding trick.

 

Should you want to just print the Octo-Crumbler without the text, I included that model for you too.  You're welcome.

 

Questions, please ask.  Happy to chat.  Please post makes too… I always love to see what people make.

 

Note 1: I used PETG because of the strength of the material, and I like to was things in HOT water after they are dirty.  PETG will stand up a dishwasher level heat.  Just don't put pressure on the fins mid-wash.  

Note 2: BuT wHat ABouT 3d PrIntInG NOt BiInG FoOD sAfE?!  

Ok, yes, it is very hard to clean the microscopic pores of 3D printed objects.  Food, bacteria, evil magic, and xenomorphs live in these little spaces and can kill you by exploding your face instantly!

Bruh… you are about to eat a Crumbl™ Cookie.  Each one is like 35,000 calories.  You likely bought a tray of 4 or even 6.  Using this Octo-Crumbler 8-way Crumbl™ Cookie Cutter isn't going to get you killed.  The cookie will kill you.  Live a little.  Life is too short to worry about stuff like this.  Microplastics, global warming, nuclear war, asteroid impact, deadly pandemics, AI or rogue black holes are all things you should worry about - but nobody does.   

So, cut a cookie, wash the thing… live your life on the edge.

 

Tagi