Picatiny Mount for 19mm Flashlight and Laser fits Stinger 2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 19 mm flashlight and Laser mount for the Steambow AR6 Stinger II crossbow.
- Ocena
- 5 / 5
- Polubienia
- 56
- Pobrania
- 483
- Wydruki
- 3
- Wyświetlenia
- 3143
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
This is a flashlight mount for the Steambow AR6 Stinger II crossbow. It fits the Steambow 19mm flashlight and laser to the lower picatinny rail in front of the vertical front grip.
This position allows you to access the power buttons without taking the hand off the handle. Together with the Steambow quick-release flashlight clip, it allows you to remove the flashlight very easily.
The flashlight holder has a loose fit. The torch has to be secured with its own clip for quick removal.
The laser mount is a clamp fit using 2 M3x10 bolts and hexagonal nuts.
The mount on the picatinny rail requires an M4x30 bolt and hexagonal nut. The nut is inserted into the slot and needs to be pushed in fully with a tool.
Might fit other brand crossbows or pistols.
Update: A few millimeters wider version to fit the quick detach bow mount was added.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2S
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
100%
Filament: Prusa PETG black
Notes:
The file with the postfix "_support" comes with easy to remove designed support in the center hole. This file can be printed standing upright without additional supports in PETG or PLA.
Post-Printing =============
The double holder comes optionally with designed support material in the insertion hole for the M4 bolt. it is easily removed with a flat screwdriver (ideally with rather sharp tip).