1 / 2
Sqashball feet for flagstone or concrete slab for vibration dampening of 3D Printers
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two designs (left/ right) of Sqashball feet for flagstone or concrete slab for vibration dampening of 3D Printers
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 538
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (25)Powiązane
This are for vibration dampening.
You can mount them with adhesive tape on the back side of your flagstone or concrete slab.
Settings:
- Infill: 30% Grid
- Supports: Yes
- Material: PETG / PLA
- Hint: print on the sqare side with supports