Nespresso Latissima Bottom Drop-Stop for bigger Cups
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bigger cups are a challenge for almost every nespresso machine. So with the Latissima. I redesigned the drop catch…
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 23
- Wydruki
- 2
- Wyświetlenia
- 240
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Bigger cups are a challenge for almost every nespresso machine.
So with the Latissima. I redesigned the drop catch tray to give 1 cm more clearance.
You can use the original metal plate or my printable replacement-plate. http://www.thingiverse.com/thing:1399520
Feel free to remix and leave me a comment! Non-Commercial!
UPDATE 2016-03-18: The last print came out as desired and works very well. Probably i will improve the design to look "better" as i have time. For now i am happy with it and hope it will make your life easier, too!
Print Settings
Printer:
CTC Dual (Sailfish x.7)
Rafts:
No
Supports:
Yes
Resolution:
0.2 mm
Infill:
10% Hex
Notes:
Print time is 5-6 hours @60 mm/s.
I recommend to print in ABS and giving it a flush with acetone afterwards. That seals it up and makes cleaning easy. My first PLA prints started to disintegrate very fast.Post-Printing
After printing, glue the two buttons into their corresponding wholes at the bottom of the print. They grab into the grooves of the machine and support guidance.
Category: Kitchen & Dining