Laptop Arch Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An arch laptop stand for holding a laptop vertically. Includes variations for laptops <= 19.5mm or <= 31.5mm thick.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 71
- Wydruki
- 1
- Wyświetlenia
- 593
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
This is a stand for holding a laptop vertically, to save space or your desk or to help it breathe :). Unlike a lot of other arch designs, this one does require some assembly, but it also prints with all the parts flat on the bed so they'll look great and print on the first try ;)
Materials Needed:
4x M3 Square Nuts
4x M3 10mm Socket Head Screws
Notes:
Print 2 bases of the size you need, and 2 Arches. You should be able to easily fit all the parts onto an MK3S print bed if you manually re-arrange them in Prusa Slicer.
Assembly:
Put the square nuts into the slots at the top of the bases. Put the arches on either side and screw them in with M3 screws. Easy!
Credits:
Thanks to everyone who made an Arch laptop holder before this one :)
Remixing: