Zonestar Z5 E3D Cyclops/Chimera mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my version of a mount for converting the Zonestar Z5MR2 to use the E3D Cyclops hotend.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 188
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is my version of a mount for converting the Zonestar Z5MR2 to use the E3D Cyclops hotend. Prints in 3 parts - no supports needed. I used #4x3/8" sheet metal screws for mounting the parts to each other, and re-used the stock hardware to mount all the fans & bed sensor. I did need to make new bowden tubes (included in the E3D kit), because the stock tubes were too short. The fan duct can be tilted to direct the cooling air right where you want it without hitting the heater block.
Print instructions
Category: 3D Printer Parts Print Settings
Printer Brand: Prusa
Printer: i3 MK2S
Rafts: No
Supports: No
Resolution: .2mm layer
Infill: 50%
Notes:
I printed mine with Inland PETG with a brim for bed adhesion.
How I Designed This
Designed in Fusion 360. I tried to keep the nozzle in the same position as the stock hotend to minimize adjustments.