Strain Gage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A quick & dirty device to get a reading on how much force it takes to pull filament through the Prusa MMU2.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 260
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
A quick & dirty device to get a reading on how much force it takes to pull filament through the Prusa MMU2. It is not linear, but will allow you to compare the drag in a quantitative manner. Take a reading using the pointer and the "teeth"
Shown with a 16 ounce weight suspended. You will need a wire/string to attach the alligator clip/clamp to grab onto the filament.
You could also use it to find out how much "pull" your Bondtech gears have before slipping.
Print instructions
Category: 3D Printer Accessories Print Settings
Printer Brand: Prusa
Printer: i3 MK2.5
Rafts: No
Supports: No
Resolution: .2mm
Infill: 15-20%
Filament: IC3D PLA gray
Notes:
3 perimeters 6 top/bottom
How I Designed This
Designed in Fusion 360