1 / 1
Gear for Shiatsu Massage Pillow ("Moustache" brand) — zdjęcie 1

Gear for Shiatsu Massage Pillow ("Moustache" brand)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacements for one of the gears inside the Moustache-brand shiatsu massager.

Ocena
5 / 5
Polubienia
9
Pobrania
127
Wydruki
1
Wyświetlenia
991
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Replacement gears for the Moustache-brand Shiatsu massager sold on Canadian e-commerce sites 123ink/ShopperPlus. 

We've had two of these units and found that the same gear often gets shredded after prolonged use. Used this OpenSCAD script: https://www.thingiverse.com/thing:3561972 to create a gear that matches the size of the one inside the massager. 

Note that there are two sides with different “twist” directions depending on which worm gear the gear interfaces with. Check that you are using the correct side. 

I've sized the center bore with an extra 0.25 mm diameter - you may use “hole horizontal expansion” in your slicer to compensate if your printer is more dialed-in than mine :)