Community Mailbox Security kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Our mailbox kept getting broken into, so I created these deterrents to slow the boneheads down (or at least make them…
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 25
- Wydruki
- 1
- Wyświetlenia
- 1265
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Share Alike
Our mailbox kept getting broken into, so I created these deterrents to slow the boneheads down (or at least make them look elsewhere)
Our mailboxes have several different lock bezels on the outside, and at least two different styles of lock bodies on the inside.
So far this has been working well for the past year
Print using PETG with 50% infill for temperature resistance & sturdiness.
Lockramp1 - is meant to be glued around the lock bezel to make it harder to grab the part with a set of visegrips. I used E-6000 glue to hold our in place.
Lockbody - is designed to fit over the lock on the inside & engage the rib of the tumbler cylinder & wedge against the inner edge of the door to prevent rotation.
Print instructions
Category: DIY Print Settings
Printer Brand: Prusa
Printer: i3 MK2.5
Rafts: No
Supports: No
Resolution: .2mm layer
Infill: 50%
Filament: Inland PETG any