1 / 4
Fidget Clicky Wheel
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
You spin it, and it clicks. And yes, it's pretty annoying!
- Ocena
- 4,333 / 5
- Polubienia
- 189
- Pobrania
- 597
- Wydruki
- 13
- Wyświetlenia
- 3546
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 13) (Komentarze: 17)Remiksy (2)Kolekcje (226)Powiązane
This clicky wheel is incredibly satisfying to spin and can sound pretty loud! It's a quick easy print that only requires two parts to be glued together (everything else is friction-fit). Because of the multiple parts, you can really showoff your filaments and color combinations.
Print Settings
- All caps should use either Concentric or Archimedean Chords bottom infill pattern and they'll need at least 3 vertical shells.
- The BaseBody should use 3 vertical shells.
- Defaults will work for all other settings.
- Infill could be increased on the BaseBody for a more “premium” feel
- Protip: If you use dichromatic filament for the DialKnob, it looks like it changes color right before your eyes!
Assembly Instructions
- Press fit the TopCap into the DialKnob. If it doesn't fit you may need to use some glue.
- Press fit the MiddleCap into the BaseBody.
- Place the GearAxel between the teeth of the BaseBody so that it sticks out of the MiddleCap.
- GLUE the DialKnob on to the GearAxel. The parts may feel secure, but you don't want this coming apart. Take your time here: you don't want any glue on the MiddleCap.
- Wait for the glue to dry, and then check the movement. If it's rough or hard to spin, add some lubricant.
- Finally, press fit the BottomCap into the BaseBody and click away!