1 / 2
Panasonic AJ-PX270 Mic Mount to Sennheiser Cold Shoe
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Not using the shotgun mic mount on your Panasonic AJ-PX270 broadcast ENG camera? Slap a Sennheiser receiver on it!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 229
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
Designed to replace the shotgun mount on an AJ-PX270 with a cold shoe for hanging a Sennheiser wireless receiver pack.
Print in ASA or PETG if you're going to abuse your camera by leaving it in hot cars or direct sunlight (bad photog). Otherwise, tough PLA should work fine. Use snug supports with sheath enabled on the back slope; they break off very easily.