Air Tool Quick Release Storage Clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a clamp design to hold lightweight air/pneumatic tools to a rafter or wall. Two of the clamp part are used and…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 431
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This is a clamp design to hold lightweight air/pneumatic tools to a rafter or wall. Two of the clamp part are used and held together with M5 hardware. A single bolt, about 25mm long and nut (locking highly recommended) are used to create the pivot point. A compression spring (3/8" x 3/4" or similar) is used to provide clamping force. Tool can be pushed in to store and pulled out and away to remove with one handed ease. Assembly Video can be found here: https://www.youtube.com/watch?v=II1lpNiOfPk
Versions for 1/4 NPT for both Industrial connectors and Automotive/Truflate are included. Only the Industrial version has been printed/tested. Fusion 360 file is included for those wanting to make there own version. I used the coupler from Mc-Master Carr and scaled it in Fusion by a factor of 1.1 to get a satisfactory fit.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
15-20%
Filament: Push Plastic PLA Off Color
Category: Tool Holders & Boxes