Kallax Record Bumper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple Kallax record organizer, single and double sided.
- Ocena
- 5 / 5
- Polubienia
- 118
- Pobrania
- 411
- Wydruki
- 8
- Wyświetlenia
- 3493
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Created to keep all my records in line. Records are kept about 2.5 cm from front of the shelf. This is a pressure fit which holds well enough but if you are moving lots of records in and out the bumper can be pushed back. Suggest using double sided tape, or adjust dimensions to keep bumpers in place.
Printed on Mini+ so I didn't have enough build volume to print entire width of the shelf so the bumper is broken up into 2 halves. if you have a larger print volume model should scale up to print entire width.
No rafts needed
Printed at .2 layer height but could probably go .3 no problem.