100mm Vesa mount for copy camera
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This mount turns a standard monitor arm into a copy stand for your camera.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 44
- Wydruki
- 1
- Wyświetlenia
- 833
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
Attaches to the VESA mount with 4 M5x25 screws and nuts. Press a ¼" hex bolt into the wheel, then capture the wheel between the adapter and the VESA mount plate on the monitor arm. Use a level to get the camera pointing straight down.
There is no vertical adjustment, you'll have to use your monitor arm or spacers under the film support for that. Also not a rigid as a copy stand, but good enough as long a you can trigger the camera remotely. I use my phone for a back light and printed a 35mm film holder - there are several film holders on this site.