1 / 2
Drapery Pulls
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Drapery Pulls
I designed these parts so you could feel if you have the correct drapery cord end. These are especially useful for double layers of draperies as when a set of shear draperies is hung with another set. They are also useful when draperies are half open so you can tell if you have the one that will close or open the drapes without trying them.
These can be printed with PLA or PETG. I use enough perimeters and top and bottom layers to get a solid result. I print them with a 0.40 mm nozzle and 0.20 mm layer height.