Clicky thingy - modular
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
With the Clicky thingy you can use different clickers with different sound and feel.
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 160
- Wydruki
- 2
- Wyświetlenia
- 1106
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Public Domain
The Clicky thingy is a clicker fidget where it's possible to change the clicker mechanism.
Different clicker mechanisms have different sound and feel. Some are quite loud, and ablit stiff, and others soft with a lower click sound.
I've also provided a fusion 360 file with sketches containing the exact dimemsions so you can create your own clicker mechanisms.
The body is a bit hard to take apart in the beginning, but gets easier after a few times.
Print in PLA at 0.3 mm layer height without any supports.
For the body, increase the infill to at least 50% and perimiters to 3.
The body should print in about 50 minutes and each clicker around 10 minutes.