Hydroponictower 3/4 Size flower pot base and watering top modification
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Standardsegments printed in 3/4 size of the original and supplemented with base and top modifications, also small lids.
- Ocena
- 0 / 5
- Polubienia
- 62
- Pobrania
- 215
- Wydruki
- 0
- Wyświetlenia
- 3475
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Using as base of the hydroponictower a flower pot I had (with diameter 25cm) to change the stand and using an EHEIM-pump I added a top for water sprinkling and with tube mount for the 12/16mm EHEIM-tube.
As top-parts I used the one from the original tower in ¾-size and melted 2 parts together so I got more stability and only had to print it threee times.
I also generated lids for the open segments.
***
Attention!
Unfortunately, my base of the hydoponics tower seems to be putting a bit much pressure on the segments, because some of the lower segments have now developed stress cracks.