Dust Cap for DIN SCUBA Diving Regulator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dust protection cap for DIN SCUBA diving regulators. Works for 200 and 300 Bar threads.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 756
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print it yourself or order from Shapeways!
Dust protection cap for DIN SCUBA diving regulators.
Works for 200 and 300 Bar threads. It has a lip on the inside that sits against the metal ring around the O-ring, so that the high pressure side / O-ring are free when the cap is on, to avoid contamination of O2 cleaned equipment. It isnot meant to be water tight, so do not immerse your regulators with the cap on and expect them to not get flooded.
It has a loop so you can attach it to things - don't attach it to your regulator though, as it will get wet during the dive and transfer water into the high pressure inlet.
Print in TPU to get the flexibility required to get it in and out.
Category: Sport & Outdoors