Scrubber Spacer for Kent Tooling Box for AP Diving Inspiration Rebreather
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spacer designed to go in between the box and the scrubber canister in a Kent Tooling box for an AP Diving Inspiration…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 435
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Spacer designed to go in between the box and the scrubber canister in a Kent Tooling box for an AP Diving Inspiration rebreather.
The thickness is chosen so that, with the lid lock pin facing the box front, the exhale hose connector is at equal distance from the front and side plates.
It has a recess to allow the scubber retainer band to be slotted through the box front plate, lugs on the front to match the cutouts on the front plate to stop it from sliding around, and holes parallel to the front to allow three cable ties to be used to tie it to the box front plate.
Probably best use TPU or some other soft material to print, to make it shock absorbent.
Category: Sport & Outdoors