Elegoo MercuryX Replacement Wash Drive Wheel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement for the faulty wash drive gear included with the Elegoo Mercury X Wash Station.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 467
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a replacement gear specifically for the Elegoo Mercury X wash station. The original design was quite poor, lacking internal structure and proper balance. Elegoo knows its an issue and has addressed it as needed. I wanted to take this on and build it better.
Print Settings
Printer: Elegoo Saturn
Rafts: Yes
Supports: Yes
Notes:
adjust scale for your expected resin curing shrinkage (try 102%)
100 microns per layer
0 transition layers
add a bit of eSun Flex to decrease brittleness
use HEAVY supports - this is a precision part and must not be warped or curved
Post-Printing
Assembly
no grub screw needed
firmly but evenly press fit the wheel to the spindle
super glue magnets to wheel
thread locker or super glue to secure the wheel to the spindle, if desired
you will need 4 or 8 20mm magnets. I recommend starting with 4 and seeing how that works.
How I Designed This
Blender
Totally built non-destructively with BoolTools to accommodate quick and accurate edits.