Powerbank for 18650 Battery
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A power bank designed with OpenSCAD for one 18650 battery.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 205
- Wydruki
- 1
- Wyświetlenia
- 1127
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
I had a power bank for a 18650 battery. After I had inserted the battery incorrectly and thereby the electronics burned out, I wanted to replace these. The spare part that I ordered, but did not fit. That's why I decided to design and print the case myself.
The design was created with OpenSCAD. This is my first design that I publish. I would be very happy, if someone has use for it.
I used the AZDelivery Power Bank Modul Laderegler TP5400. You will need some wire for the spring of the negative pole and some metal sheet for the positive pole.
Feel free to use and customize the design.
I've published this design first on Thingiverse.
Print Settings
| Printer: | ANET A8 |
| Rafts: | No |
| Supports: | No |
| Resolution: | 0.16 |
| Infill: | 10% |
| Filament brand: | OWL |
| Filament color: | RAL 1028 |
| Filament material: | PLA |
Note: I've printed the inner part with supports. I don't know if it is necessary.