Nerdvana marquee
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
800x180mm Nerdvana marquee.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 229
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to spice up my home office (aka "the Nerdcave") and there was a WS2812B LED-stripe laying around…
A few moments later my printer started to print the first pieces of a 800x180mm Nerdvana marquee.
You need:
750gr black PLA
250gr white PLA
3x 2m copper wire (three colors, 3x 0,14mm²)
3m 2-core copper wire (power cable - 2x 0,35mm²)
some alum tape
3m WS2812B LED Stripe https://www.amazon.de/dp/B0743B5H58/ref=cm_sw_em_r_mt_dp_35ZJDEWHMA2PHF6JKN29?_encoding=UTF8&psc=1
a WS2182B wireless LED controller https://www.amazon.de/dp/B01EVJHK6C/ref=cm_sw_em_r_mt_dp_2F8YD5861WHTPCRWT2VY?_encoding=UTF8&psc=1
5V <4A power outlet https://www.amazon.de/dp/B07PBNCFDG/ref=cm_sw_em_r_mt_dp_K3XJHMQE09V9BYWYE0FV?_encoding=UTF8&psc=1
Print all parts, glue the black parts together
Wire the controller to the LED-stripe
Wire the power cable to the LED-stripe
Glue the LED-stripe to the inside, use alum tape for reflections
Connect the LED-stripe segments with the small three coloured wires
Insert the white parts
Connect to power outlet
Shine!
Disclaimer:
This work by blecheimer is licensed under CC BY-NC-SA 4.0
You are not allowed to copy this model to other 3D printing websites without my permission.