Fully Printed Bending Tool For Fine Sheet Metals (e.g. Etched Parts)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
tool for bending small sheet metal parts
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 199
- Wydruki
- 2
- Wyświetlenia
- 1205
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Sometimes I need a tool for bending small sheet metal parts. You can buy these bending tools but they are expensive. And making is more fun then buying.
So I made a bending tool for fine sheet metal parts. It is fully printed and you need no other parts.
You can use this tool for instance to build some "metal earth" kits.
The parts are designed for a layer height of 0.2mm, three walls and 20% cuboid infill. You can use some candle wax on the thread to make it run smoother.
Disclaimer:
This work by blecheimer is licensed under CC BY-NC-SA 4.0
You are not allowed to copy this model to other 3D printing websites without my permission.