1 / 3
Real Steel H9 Takin Thumb Lever
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I never liked the original thumb lever of the Real Steel H9 Takin knife. So I made my own one.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 149
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
I never liked the original thumb lever of the Real Steel H9 Takin knife. In my opinion it was too large, too chunky and too ugly.
So I designed a very simple replacement.
Print it slowly at a small layer height. I used 0.08mm layer height and a 0.4mm nozzle @ 30mm/s.