Pen or Tool Stand / Spring Design
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was looking for a stand to keep my fountain pens upright. I did not find something that I liked so I designed…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 259
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was looking for a stand to keep my fountain pens upright. I did not find something that I liked so I designed something.
This pen / tool stand is shaped like a spring and it even has some flexibility. There are four designs:
straight round sping
tapered round spring
straight hex spring
tapered hex sping.
The straight spring has a diameter of ~55mm , the opening of the tapered spring is ~53mm.
All four can be scaled down, if necessary. I guess scaling up is possible, too.
The springs print well at 0.2mm layer height. 0.3mm is also possible, if your printer supports this height.
You will need support within the parts. And its removal is no fun...
Disclaimer:
This work by blecheimer is licensed under CC BY-NC-SA 4.0
You are not allowed to copy this model to other 3D printing websites without my permission.