Coast Knives 5-Point Pivot-Screw Tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a little tool for the pivot screw of the Coast-Knives' FX352. Coast-Knives is using a screw with a 5-point…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 173
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a little tool for the pivot screw of the Coast-Knives' FX352.
Coast-Knives is using a screw with a 5-point head for the pivot joint. To adjust the knife's folding mechanism you need a special tool.
For the tool you need five steel rods Ø1.2mm x 4mm.
Depending on your print material you may need to scale the object a little bit to match the screw. Try a setting of 99% or 101% if your first print does not fit on the screw.
Disclaimer:
Due to the recent incidents (things appearing on ebay) I just want to make something very clear:
I do not allow any commercial use of my STL-files, my designs and my photos!
Category: DIY