1 / 4
GRR-RIP Block tool holder for 18mm (3/4") French cleat — zdjęcie 1
1 / 4

GRR-RIP Block tool holder for 18mm (3/4") French cleat

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tool holder for the GRR-RIP Block from Microjig. The tool holder is made for a 18mm (3/4") French cleat.

Ocena
0 / 5
Polubienia
24
Pobrania
93
Wydruki
0
Wyświetlenia
594
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial

A simple tool holder for the Microjig GRR-RIP Block tool. The holder has a build-in fresh cleat for 18mm (¾") cleats. If you need for 12mm (½") cleat or no cleat at all, please look under related models. The model is 18cm long, so it can be printed on the Prusa Mini. Best way to print it is vertical, as it uses the least amount of support, but you can also print it horizontally which takes 1 ½ hour longer due to the extra support needed.

When printed vertically chose standard support settings and support everywhere. The support can easily be removed with your fingers. For strength choose 3 perimeters and 15% infill. I chose Gyroid as infill with all other settings for infill and support as standard, which worked great. I printed with a 0.6 nozzle head at 0.40 draft mode for maximum speed with no problems. Print material used was PLA.

 


 

Tagi