E3D V6 Collet Clips - various sizes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the original with different heights.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 196
- Wydruki
- 5
- Wyświetlenia
- 793
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These collet clips are remixed from the provided step file from the E3D “crazy collet clips”.
They are like the original one, but they have different heights. The original has 1mm, the remixed ones have 1.2mm, 1.4mm, 1.6mm, 1.8mm and 2.0mm.
As I had severe underextrusion on my MK3S & MMU2S, I found out that my E3D V6 hotend didn't hold the PTFE tube in place during printing anymore, so I figured that a higher clip would hold it in place more securely.
I tried the different sizes until I found one that would fit perfectly and therefore would do the trick. (1.4 in my case).
It fixed the issue and my trusty Prusa is now running again. 😎
I thought I'd post them here, maybe they will be useful for someone with the same problem.