1 / 1
Anti-vibration TPU feet for Prusa i3 MK3S+ Supports heavy loads
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a TPU anti-vibration foot for the Prusa i3 MK3S+.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 111
- Wydruki
- 1
- Wyświetlenia
- 627
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (13)Powiązane
This is the Prusai3 MK3S+ anti-vibration foot for heavy loads and printing on soft TPUs.
For best results, you should print on the TPU.
You need to print 4 or more of these!
No support material required. 20% of infill is recommended.
Thanks to ctheroux for creating the Original model.