1 / 2
Short (10cm) crank and handle for BioToi UDDT TTT — zdjęcie 1
1 / 2

Short (10cm) crank and handle for BioToi UDDT TTT

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Short crank type for BioToi UDDT

Ocena
0 / 5
Polubienia
1
Pobrania
14
Wydruki
0
Wyświetlenia
199
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The crank supplied as standard with the BioToi is relatively long and can bump against the wall if the toilet is placed flush with the wall. With this shorter version, you can avoid this problem without having to change anything.

An approx. 6cm long M5 screw is required to mount the handle to the crank. I recommend using PETG as printing material.

Update: Added a slightly reinforced stl file since my first broke due to some “overload” ;-)

Tagi