Smash Bros Special Flag Trophy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made for a friend for their office Smash Bros competitions. Needs two small dowels and one base dowel. The fit is…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 299
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
Made for a friend for their office Smash Bros competitions.
Needs two small dowels and one base dowel.
The fit is reasonably tight, and will stay together press fitted, but if it's going to be handled I'd recommend super gluing the dowels in. It also stands up well and is stable on its base.
I rushed the print in the version shown here and I should have printed the base at a far lower layer height, should print well at 0.18mm.
The S and flag pieces where printed at 100% infill to add a little weight.
Print Settings
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.18
Infill:
100
Filament:
Generic PLA
Category: Games